Energy-Efficient Separation of Water–Petroleum Emulsion

Russian Engineering Research - Systems are considered for the dehydration of petroleum so as to separate water–petroleum emulsions. In particular, the low-temperature microwave (UHF)...     

New Design of Wavelets Based on the Convolution of Compactly Supported Functions with a Rectangular Pulse

Journal of Communications Technology and Electronics - A new design of wavelets based on the convolution of a compactly supported function with a rectangular pulse is proposed and theoretically...     

Adsorption of the IFKhAN-92 Inhibitor on Chromium–Nickel Steel from Mineral Acid Solutions

Protection of Metals and Physical Chemistry of Surfaces - Impedance spectroscopy was used to study the adsorption of the IFKhAN-92 inhibitor, a triazole derivative, on cathodically polarized...     

双目结构光系统仿真建模和误差灵敏度分析

结构光系统目前在三维测量、逆向工程等领域应用日益广泛,然而关于结构光系统性能评测方法的研究成果仍然很少,仅有少数国际标准给出了3D扫描系统的性能评测方法.本文首先建立了双目结构光系统的仿真模型,其中包括了相机镜头畸变模型和针孔成像模型,实现投影仪投射数字正弦条纹的仿真和被扫描的靶球特征量仿真计算,采用的三维重建方法为光学三角法.然后基于仿真模型,对其基线距离相关的误差灵敏度进行了仿真,发现靶球中心位置和靶球球心距对基线距离误差具有较高的灵敏度,可以作为测试方法的输出.最后,如果只考虑基线距离误差,标准测试方法中的校准球棒的位置应在测量范围内的相对距离尽可能大,为标准性能评测方法提供了改进建议.     

免涂装低屈强比耐候桥梁钢的开发应用

通过优化成分设计以及轧制、热处理工艺,成功开发出8 ～ 80 mm厚度的免涂装低屈强比耐候桥梁钢.针对免涂装低屈强比耐候桥梁钢的工艺、金相组织和焊接性进行分析研究,结果表明:耐候桥梁钢Q345qENH～ Q690qENH的屈强比可以通过适量铁素体+不同形态贝氏体组织配比进行调控,使低温冲击韧性、低屈强比和耐候性同时得到保证,实现了优良的强度、冲击韧性和可焊性.     

Deep Neural Networks for Determining the Parameters of Buildings from Single-Shot Satellite Imagery

Journal of Computer and Systems Sciences International - The height of a building is a basic characteristic needed for analytical services. It can be used to evaluate the population and functional...     

Fabrication of Cu/graphite film/Cu sandwich composites with ultrahigh thermal conductivity for thermal management applications

Effective thermal management of electronic integrated devices with high powder density has become a serious issue, which requires materials with high thermal conductivity (TC). In order to solve the problem of weak bonding between graphite and Cu, a novel Cu/graphite film/Cu sandwich composite (Cu/GF/Cu composite) with ultrahigh TC was fabricated by electro-deposition. The micro-riveting structure was introduced to enhance the bonding strength between graphite film and deposited Cu layers by preparing a rectangular array of micro-holes on the graphite film before electro-deposition. TC and mechanical properties of the composites with different graphite volume fractions and current densities were investigated. The results showed that the TC enhancement generated by the micro-riveting structure for Cu/GF/Cu composites at low graphite content was more effective than that at high graphite content, and the strong texture orientation of deposited Cu resulted in high TC. Under the optimizing preparing condition, the highest in-plane TC reached 824.3 W·m⁻¹·K⁻¹, while the ultimate tensile strength of this composite was about four times higher than that of the graphite film.     

深海环境下浮力材料的力学性能研究

浮力材料凭借其优异的机械性能和低密度,在深海装备、航空航天及生活用品中的应用越来越广泛。将空心玻璃微珠填充环氧树脂基体中采用模压的方法制备了三种密度浮力材料,对产品全方位静水压(12.5MPa)作用后的力学性能、尺寸稳定性、吸水率等进行了测试。结果表明,浮力材料经过全方位静水压作用后,压缩性能基本没有变化,剪切强度保留率在95%以上,拉伸强度和冲击强度都有所提高,尺寸稳定性好,吸水率随着静水压作用时间的延长先快速升高后趋于稳定。